> Without researching, idk when that got fixed because nothing on the boxes tells you.
In fact it did, in the transitional models that were sold both with and without 802.3af support there was a sticker added to the box on the ones that had it.
The switch was early in the life of the UAP-AC series of access points. IIRC the "Pro" and in-wall models always supported 802.3af but the "Lite" and "LR" models initially were 24v passive only. I vaguely recall there also being transitional models of their cameras but we were not deploying those at the time.
> Consumer tier means people will plug whatever fits.
And this is why I hate passive PoE with a passion. Standards-based PoE ports are safe, you can plug devices not supporting PoE (or requiring passive PoE) in to them with no risk of damage. Passive PoE ports are dangerous, they can and will destroy things that are not expecting to receive power on those ports.
They're even dangerous to devices designed for it in some cases, Ubiquiti actually famously had problems with UAPs on the end of long cables being damaged when fed by passive PoE from the source and eventually recommended that those installs add their "Instant 802.3af" adapters which took standard 802.3af over the wire and converted it to passive right at the device end. I had one site that lost three UAP-LRs before that was revealed.
In fact it did, in the transitional models that were sold both with and without 802.3af support there was a sticker added to the box on the ones that had it.
The switch was early in the life of the UAP-AC series of access points. IIRC the "Pro" and in-wall models always supported 802.3af but the "Lite" and "LR" models initially were 24v passive only. I vaguely recall there also being transitional models of their cameras but we were not deploying those at the time.
> Consumer tier means people will plug whatever fits.
And this is why I hate passive PoE with a passion. Standards-based PoE ports are safe, you can plug devices not supporting PoE (or requiring passive PoE) in to them with no risk of damage. Passive PoE ports are dangerous, they can and will destroy things that are not expecting to receive power on those ports.
They're even dangerous to devices designed for it in some cases, Ubiquiti actually famously had problems with UAPs on the end of long cables being damaged when fed by passive PoE from the source and eventually recommended that those installs add their "Instant 802.3af" adapters which took standard 802.3af over the wire and converted it to passive right at the device end. I had one site that lost three UAP-LRs before that was revealed.