Hacker Newsnew | past | comments | ask | show | jobs | submit | medvidek's commentslogin

In my country there are several telco operators that will send you basically an unlimited number of SIM cards for free (as in free beer) that you can use for getting the verification SMS and then immediately throw the SIM away. The only "cost" is that you have to wait a day or two for the SIMs to get to your physical mailbox.

For some reason Prague -> Bratislava trips are only shown with departures at 00:36 even though there are several through cars that leave Prague at 21:58 (and join the rest of the listed NightJet in Breclav), which is much more comfortable for your average traveler. Ceske drahy website has both connections, so maybe you aren't scraping it yet?

Hm, thanks for the tip, I didn't know that. I scrape NightJet website, which lists only the 00:36 train. I'll look into it.

In most of the EU, IDs are issued for free to everyone above age 14/15 (and in many countries you can get one even for a newborn for a small fee). Since everyone has this ID, all banks (nearly?, I haven't seen one that doesn't) require ID card and/or a passport to open an account. For medical care you have a separate card with your compulsory medical insurance information that you present to the doctor but in the worst case they can just look up the info using your ID/passport.

Personal anecdata: I get much more spam calls on a number from a country with mandatory ID sim card registration than on a number from a country where anonymous sim cards are allowed. Both numbers are almost 20 years old and I barely use them for anything but calls/sms to friends/relatives and receiving bank 2FA SMSes.

Personal anecdote from my wife yesterday. She doesn’t get many spam calls but has noticed that when a particular friend calls her, she gets a spam call later that day. I surmised that the friend has some spyware on their phone which is reporting “active” numbers.

For some reason, I'm softlocked from booking tickets from Deutsche Bahn. The website errors out with a cryptic "Your browser's behavior resembles that of a bot." message with no option to try again or pass a captcha or whatever. The website itself described several possible solutions but none helped (I tried using different computers, different internet connections, even a phone connected to internet using a SIM from a different country).

As for now, when I need to travel to Germany, I just book tickets through the national carrier of my home country, which for cross-border tickets often turns out to actually be cheaper than booking through DB. Thankfully I don't live in Germany proper and my need for travel there is not that high (once or twice a year at most) but I wonder what would I do if I had to move to Germany and use trains there more often.


Same problem but with French equivalent SNCF (sncf-connect.com). I just checked and can confirm nothing has changed. You cannot use up-to-date Firefox on Linux to access the main booking site for French rail tickets.

    Access is temporarily restricted

    We detected unusual activity from your device or network.

    Reasons may include:

    -Rapid taps or clicks
    -JavaScript disabled or not working
    -Automated (bot) activity on your network (IP X.X.X.X)
    -Use of developer or inspection tools

Does it work if you spoof the user agent?

> -Use of developer or inspection tools

Gotta love it.


It gets blocked in a private window, but only on the second page load. So more sophisticated than UA-blocking.

The finger-wagging about "Use of developer or inspection tools" is just outrageous. Akin to accusing users of thought crime.

The only solution to all this will be through elections and laws.


Developer tools are easily detected by looking for the viewport to resize a certain amount.

I just opened the developer tools, then chose 'Separate Window' from the menu. The developer tools are now on my other screen, and then I clicked Reply to your message. The developer tools window that I had open is not relating to this tab, but when I opened Developer Tools for this tab, it remembered that I wanted it in a separate window and did so again. The viewport should not have changed at all..?

DB has been finicky for me from abroad as well, using a VPN to Germany usually helped. Still sucks though.

> The Czech layout isn't exactly an obscure edge case.

From what I understand, the problem wasn't with typing characters actually used in the Czech language such as á, ř or ů. The problem was with typing the ˇ character by itself, which is normally encoded in Unicode as U+02C7 (CARON), but there also is a combining version (U+030C, COMBINING CARON), which is what gets printed if there is no precomposed character (e.g. š is both U+0161 and U+0073 U+030C). There is a thing called Unicode normalization that makes "identically looking" strings actually use the same codes, so maybe it was that thing that changed a bit (maybe even somewhere else and not in the lockscreen/keyboard logic), or they could have just removed the ability to type ˇ by itself altogether since it's not something actually used in any language or writing style and most often comes up as a result of a typo.


I remember a website that silently removed everything but the first 8 characters from the "password" field upon registration but somehow didn't do the same on the login page. It took me several hours and several password resets to actually log in after registration, since for some reason the trimming happened client-side and only when typing the password manually (and I was pasting my password from a password manager).


In a similar vein, I remember encountering a site where the frontend enforced basic complexity requirements ala “use at least one number and one symbol” but the system would silently drop all non-alphanumerics when it saved (presumably in some kind of failed conversion on the way into the backend DB). So setting a password like “foo_bar4!” would become “foobar4” which was surprising. What blew my mind though was when I figured out the stripped password worked to log in, which was how I eventually figured out what was happening, escaped the reset flow, and generated a compliant password.


Tangentially related, a relative bought a new Apple laptop a few weeks ago, and I was tasked with setting it up. The computer came pre-equipped with a Czech keyboard (apparently the US models weren't in stock and that relative needed a new computer as soon as possible, so they bought a Czech one).

Since the user doesn't speak Czech, I promptly removed the Czech layout and installed two other layouts, US English and Hebrew, for the languages that the relative uses to type on the computer.

For some reason, login screen just after boot still uses Czech layout, which means Z and Y are swapped and numbers must be typed with Shift (just pressing numbers outputs Czech letters like ěščř). So when booting up the machine (remember that you can't use fingerprint during first unlock), the user must type the password in whatever layout is physically printed on the keys, even though the rest of the OS doesn't even have a mention of that layout. Somehow afterwards the OS "can" see the list of the layouts and lock screen correctly chooses the English US layout.

Alongside of that, for some reason, the key that's supposed to type ` and ~ in the US layout types some nonsense instead (a plus-minus sign and a section sign), whereas the backtick key is for some reason located between left Shift and Z (good luck unlearning years of muscle memory typing ~/Documents in the terminal)


This feels like it's probably a stupid oversight chain like, keyboard layouts are user-specific data, so they're not decrypted before first unlock/set globally because the machine might have multiple users with different keyboard layouts.


Even if it is, why is there no way to change the system-wide settings? All other operating systems that I know either have an explicit button "Apply settings to login screen" or do it automatically (I'm sure 99% of the consumer-level computers sold worldwide never have more than one user on them, moreso with different keyboard layouts).


Evidently you can, though in traditional macOS fashion, you exploit Apple secretly changing the setting for you if you do a magic dance.[1][2]

I've never had a reason to try it, but there's also a remark that 99% of the Macs sold probably don't need to change the system-wide keyboard layout defaults, either...

[1] - https://heylon.ca/how-to-permanently-switch-default-keyboard...

[2] - https://support.apple.com/guide/mac-help/change-the-system-l...


Interesting how you need a separate app to open parcel lockers in Poland. In the Czech Republic the locker provider just sends you an email/SMS (as a part of the "ready for collection" message) with a code that you type on the locker's keyboard, which is sometimes physical, sometimes a touch screen, and the locker opens, no app needed.


I don't use the app (I guess it's about InPost). I usually just scan a QR code that I recieve to my inbox. Code from SMS also works just fine.


Is it only me, or does the logo in the header really look like someone forgot a zero in the number of pixels when running some compression tool?


this is an artifact of an AI generated site, it always puts the logo there without attempting to trim it

"View all →" the messy header

the signs are all there


Guidelines | FAQ | Lists | API | Security | Legal | Apply to YC | Contact

Search: